Sediment velocity estimation using iterative 3-D migrations of short offset seismic reflection data in deep water

In deep ocean settings where water depth greatly exceeds the source-to-receiver length, the geometry is insufficient for accurate determinations of velocity from reflection-moveout. However, velocities are crucial for estimates of physical properties and image processing. Focusing analyses with conventional post-stack two-dimensional migration improves images, but does not produce geologically meaningful velocities except in the special case of a two-dimensional earth. For the more general case of the three-dimensional earth there is no a priori method to determine the degree of geometrical complexity. We present a technique using a short-offset three-dimensional (3-D) data set over the 5 km deep trench west of the Lesser Antilles. These data illustrate highly sensitive post-stack 3-D focusing analyses (± 20 m s^–1 interval velocities), and the relationship of these seismically derived velocities to rock velocities. In our Barbados example we were able to establish the presence of a widespread 80-160 m thick low-velocity zone at and above the main low-angle fault. This observation suggests the water-rich décollement leaks water into the overlying sections. Also evident is a low-velocity section associated with turbidite sands. These results are confirmed with sparse logging data and well samples. Deep-water short offset 3-D experiments provide a potentially effective approach for velocity estimation, replacing the operational complexity of long-offsets with simpler short-offset techniques. In areas of structural complications and abundant diffracted energy, it is a surprisingly accurate method, utilizing the high fidelity 3-D wavefield and the information carried in zero-offset diffraction ellipsoids. The velocity used to properly collapse a diffraction ellipsoid is explicitly the velocity of propagation in the media since the travel path is known exactly. Thus, the derived velocities should closely represent rock velocities, unlike the 2-D case where the propagation geometry is not known.     

Metamorphism of four desert ureilites and luminescence spectroscopy of defects in ureilitic diamonds

Four ureilites subjected to impact metamorphism in a pressure range of ~15–100 GPa were investigated for mineralogical and petrological features and optical luminescence of their diamonds with the aim to understand how properties of ureilitic diamonds are correlated with shock and thermal histories of the host meteorite. Petrological data show that all the investigated ureilites experienced multistage metamorphic histories. Some of them were shocked at least twice or/and underwent high‐temperature thermal metamorphism and fluid metasomatism in the parent body interior. Photoluminescence spectra of individual diamond grains reveal the presence of neutral and negatively charged nitrogen‐vacancy (NV⁰ and NV^?, respectively) and H3 (two nitrogens and a vacancy) defects, indicating relatively high nitrogen contents of the diamonds and some degree of thermal annealing of the grains. The diamond grain size and morphology, a texture of graphite‐diamond aggregates, and spectroscopic properties of the diamond phase vary widely both within an individual meteorite and between the ureilites. Shock‐driven transformation of sp2‐C into diamond provides the most natural explanation of the observed spectroscopic diversity of the diamond grains if one takes into account strong dependence of the PT parameters and efficiency of the transformation on structure of the carbonaceous precursor.     

Ostracod palaeoecology and environmental change in the Laptev and Kara seas (Siberian Arctic) during the last 18 000 years

Fossil ostracod assemblages were investigated in five AMS ¹⁴ C‐dated cores from various water depths of the Laptev and Kara seas ranging from the upper continental slope (270 m) to the present‐day shelf depth (40 m). Six fossil assemblages were distinguished. These represent the varying environmental conditions at the North Siberian continental margin since about 18 ka. In the cores from the shelf the ostracod assemblages reflect the gradual transition from an estuarine brackish‐water environment to modern marine conditions since 12.3 ka, as induced by the regional early Holocene transgression. The core from the upper continental slope dates back to c. 17.6 ka and contains assemblages that are absent in the shelf cores. The assemblage older than 10 ka stands out as a specific community dominated by relatively deep‐water Arctic and North Atlantic species that also contains euryhaline species. Such an assemblage provides evidence for past inflows of Atlantic‐derived waters from as early as c. 17.2 ka, probably facilitated by upwelling in coastal polynyas, and a considerable riverine freshwater influence with enhanced surface water stratification owing to the proximity of the palaeocoastline until early Holocene times. In all studied cores, relative increases in euryhaline species dominant in the inner‐shelf regions are recorded in the mid–late Holocene sediments (<7 ka), which otherwise already contain modern‐like ostracod assemblages with relatively deep‐water species. This observation suggests euryhaline species to be largely sea‐ice‐ and/or iceberg‐rafted and therefore may provide evidence for a climate cooling trend.     

Formation of a small impact structure discovered within the Agoudal meteorite strewn field,Morocco

A relic impact structure was recognized within the strewn field of the Agoudal iron meteorite. The heavily eroded structure has preserved shatter cones in a limestone basement, and remnants of autochthonous and allochthonous breccias. Fragments of iron incorporated into the allochthonous breccia have a chemical composition (Ni = 5.16 wt%, Ir = 0.019 ppm) similar to that of the Agoudal meteorite, supporting a syngenetic origin of the strewn field and the impact structure. The total recovered mass of Agoudal meteorite fragments is estimated at approximately 500 kg. The estimated size of the SE–NW‐oriented strewn field is 6 × 2 km. Model calculations with minimal preatmospheric size show that a similar meteorite strewn field plus one small crater with observed shock effects could be formed by fragmentation of a meteoroid approximately 1.4 m in diameter with an impact angle of approximately 60° from the horizontal. However, the most probable is an impact of a larger, 3–4 m diameter meteoroid, resulting a strewn field with approximately 10 craters, 10–30 m in diameter each, plus numerous meteorite fragments. The calculated scattering area of meteorite shrapnel ejected from these impact craters could completely cover the observed strewn field of the Agoudal meteorite.     

Determining Titan surface topography from Cassini SAR data

A technique, referred to as SARTopo, has been developed for obtaining surface height estimates with 10 km horizontal resolution and 75 m vertical resolution of the surface of Titan along each Cassini Synthetic Aperture Radar (SAR) swath. We describe the technique and present maps of the co-located data sets. A global map and regional maps of Xanadu and the northern hemisphere hydrocarbon lakes district are included in the results. A strength of the technique is that it provides topographic information co-located with SAR imagery. Having a topographic context vastly improves the interpretability of the SAR imagery and is essential for understanding Titan.SARTopo is capable of estimating surface heights for most of the SAR-imaged surface of Titan. Currently nearly 30% of the surface is within 100 km of a SARTopo height profile. Other competing techniques provide orders of magnitude less coverage.We validate the SARTopo technique through comparison with known geomorphological features such as mountain ranges and craters, and by comparison with co-located nadir altimetry, including a 3000 km strip that had been observed by SAR a month earlier. In this area, the SARTopo and nadir altimetry data sets are co-located tightly (within 5-10 km for one 500 km section), have similar resolution, and as expected agree closely in surface height. Furthermore the region contains prominent high spatial resolution topography, so it provides an excellent test of the resolution and precision of both techniques.     

The Meteoritical Bulletin,No. 96, September 2009

Abstract— The Meteoritical Bulletin No. 96 contains a total of 1590 newly approved meteorite names with their relevant data. These include 12 from specific locations within Africa, 76 from northwest Africa, 9 from the Americas, 13 from Asia, 1 from Australia, 2 from Europe, 950 from Antarctica recovered by the Chinese Antarctic Research Expedition (CHINARE), and 527 from the American Antarctic program (ANSMET). Among these meteorites are 4 falls, Almahata Sitta (Sudan), Sulagiri (India), Ash Creek (United States), and Maribo (Denmark). Almahata Sitta is an anomalous ureilite and is debris from asteroid 2008 TC3 and Maribo is a CM2 chondrite. Other highlights include a lunar meteorite, a CM1 chondrite, and an anomalous IVA iron.     

Cloud radiative forcing of subtropical low level clouds in global models

Simulations of subtropical marine low clouds and their radiative properties by nine coupled ocean-atmosphere climate models participating in the fourth assesment report (AR4) of the intergovernmental panel on climate change (IPCC) are analyzed. Satellite observations of cloudiness and radiative fluxes at the top of the atmosphere (TOA) are utilized for comparison. The analysis is confined to the marine subtropics in an attempt to isolate low cloudiness from tropical convective systems. All analyzed models have a negative bias in the low cloud fraction (model mean bias of −15%). On the other hand, the models show an excess of cloud radiative cooling in the region (model mean excess of 13 W m⁻²). The latter bias is shown to mainly originate from too much shortwave reflection by the models clouds rather than biases in the clear-sky fluxes. These results confirm earlier studies, thus no major progress in simulating the marine subtropical clouds is noted. As a consequence of the combination of these two biases, this study suggests that all investigated models are likely to overestimate the radiative response to changes in low level subtropical cloudiness.     

Major and trace elements in German bottled water,their regional distribution,and accordance with national and international standards

The market for mineral water has been growing steadily over the last few years. Germany is the country with the highest number of bottled mineral water brands (908 bottled water samples from 502 wells/brands were analyzed). The per capita consumption of mineral water in Germany in 2003 was 129 L. A wide range of values of one to seven orders of magnitude was determined for 71 elements in the bottled water samples analyzed by ICP-QMS, ICP-AES, IC, titration, photometric, conductometric and potentiometric methods. A comparison of the element concentrations and the legal limits for both bottled and tap water (EU, Germany, US EPA, WHO) shows that only 70% of the 908 mineral water samples fulfill the German and EU drinking water (i.e., tap water) regulations for all parameters (not including pH) for which action levels are defined. Nearly 5% of the bottled water samples not fulfill the German and EU regulations for mineral and table water. Comparison of our results with the current German and European action levels for mineral and table water shows that only 42 of the bottled water samples exceed the limits for one or more of the following elements: arsenic, nitrate, nitrite, manganese, nickel and barium concentrations. Ten of the bottled water samples contain uranium concentrations above the 10 μg/L recommended limit.     

The role of the Kupferschiefer in the formation of hydrothermal base metal mineralization in the Spessart ore district, Germany: insight from detailed sulfur isotope studies

The Spessart district (SW Germany), located at the southwestern margin of the Permian Kupferschiefer basin in Central Europe, hosts abundant stratabound and structurally controlled base metal mineralization. The mineralization styles identified are (1) stratabound Cu-Pb-Zn-(Ag) ores in Zechstein sedimentary rocks, (2) structurally controlled Cu-As-(Ag) ores in Zechstein sedimentary rocks, (3) crosscutting Co-Ni-(Bi)-As and Cu-Fe-As veins, (4) stratabound metasomatic Fe-Mn carbonate ores in Zechstein dolomite, (5) barren barite veins, and (6) Fe-Mn-As veins in Permian rhyolites. Building on previous work that involved mineralogical, textural, and chemical characterization of the major mineralization types, we have performed a comprehensive sulfur isotope study that applied both conventional and novel laser-ablation multi-collector inductively coupled plasma mass spectrometry techniques. The δ³⁴S values of sulfide minerals from the different ore types are consistently negative and highly variable, in the range between −44.5‰ and −3.9‰, whereas the δ³⁴S values of barite are all positive in the range between 4.7‰ and 18.9‰. Remarkably, stratabound and structurally controlled mineralization in Zechstein sedimentary rocks has the least negative δ³⁴S values, whereas vein-type deposits have consistently more negative δ³⁴S values. The observed pattern of sulfide δ³⁴S values can be best interpreted in terms of fluid mixing at the basement-cover interface. Hydrothermal fluids originating from the crystalline basement migrated upward along subvertical fault zones and were periodically injected into groundwaters that were flowing in the post-Variscan sedimentary cover. These groundwaters had interacted with the Zechstein sedimentary rocks, resulting in fluids characterized by elevated concentrations of reduced sulfur (with negative δ³⁴S values) and alkaline pH. Repeated mixing between both chemically contrasting fluids caused rapid and efficient precipitation of sulfide ore minerals in hydrothermal veins with highly variable but distinctly negative δ³⁴S values.